X40133S1-AB 40kW 1000V Zero Standby Power Consumption Power Module
40kW 1000V Power Module
X40133S1-AB Power Module

X40133S1-AB 40kW 1000V Zero Standby Power Consumption Power Module

Model: X40133S1-AB
Input voltage range: 260-485Vac
Output voltage range: 50-1000Vdc
Power: 40 kW
Protection rating: IP20

Send Inquiry

Product Overview

X40133S1-AB Zero Standby Power Consumption The smart AC/DC charging module is designed for high power EV charging equipment, applied the world’s latest power electronic control topology, with good performance and power density, achieves high efficiency, wide output voltage range to meet today and future EV charging requirement, wide operation temperature range makes it can be applied in hot weather, thorough gel filled technology ensures higher protection.

Key Features

➢ Full-SiC components, high conversion efficiency (peak ≥96.7%)
➢ Dynamic protection algorithm for better strategy and reliability
➢ Intelligent noise control (full-load ≤63dB at ambient temperature)
➢ Smart lifespan prediction & alert for key components/fans, lower O&M cost
➢ 3-phase (no neutral) eliminates high neutral current risk
➢ Support module address config via keypad or software
➢ Gel-filled for enhanced environmental suitability
➢ Built-in AC input relay, true Zero Standby Power Consumption
➢ Built-in voltage discharge circuit

Technical Specifications

AC Input
Voltage Range260-485Vac, linear derating to 20kW@323~260Vac
Wiring MethodThree Phase, 3W+PE
Frequency50/60Hz ±5Hz, rated 50Hz
THDi≤3%@p.n.
Power Factor≤0.99@100% load
DC Output
Voltage Range50-1000Vdc (performance indicators not evaluated below 200Vdc)
Nominal Power40kW at 300-1000Vdc
Max Current133A
Conversion EfficiencyHighest ≥96.7%, Rated ≥96%
Voltage Ripple FactorWithin ±1%
Current ImbalanceWithin ±5%
Voltage RegulationWithin ±0.5%
Current RegulationWithin ±1%
Communication
CommunicationCAN
Parallel Installation60 Modules max.
Module AddressSupport software setting and hardware setting
Operation Condition
Operation Temp.-40℃ ~ +75℃ (linear derating to 0 @55~75℃)
Relative Humidity<95% RH, non-condensing
AltitudeUnder 2000m with nominal power, derating above 2000m
CoolingForce Air
General Specifications
Dimension300×437×84 (W×D×H, mm, w/o handle)
Weight<20kg
Standby Power Consumption<12W@input relay connected
NoiseUnder 63dB at full load @ambient temperature
MTBF>500k hours
Protection
Module Over-temperatureAuto-shutdown, fault clears when temperature normalizes, module in standby
Input overvoltage/undervoltage/phase lossAuto-shutdown, fault clears when input normalizes, module in standby
Overcurrent or short circuitAuto-protection shutdown and lockout
Output overvoltageDual hardware & software protection

Module characteristic diagram

Applications

Standalone Fast Charging Stations
Battery Swapping Stations
Mining Truck, Construction Vehicle Megawatt Chargers
Group DC EV Charging Systems

滚动至顶部