IPUDA EV Charger Retractor CE IP 55 6Kgs, 8Kgs
Tensile strength: 8 kg / 80 N
Cable length: 3.6 m
Material: Stainless steel
Suitable for inner cable diameter: 30–35 mm
Product Features
Powder-coated sheet metal bracket
Stainless steel 360-degree swivel shaft
Stainless steel 360-degree locking mechanism
Stainless steel clockwork spring
Aluminum alloy wheel
All-metal cable pulley (reduces cable wear and extends service life)
UHMWPE fiber rope (4mm diameter; breaking strength over 300kg)
Technical Specifications
Dimensional Drawing
Instructions for Use
1. Pull the cable to extend the lifting mechanism's cord. Stop pulling once the desired length is reached. Versions equipped with a locking mechanism will engage the lock after the cord retracts by approximately 10 cm, preventing further retraction; versions without a locking mechanism will maintain constant retraction tension.
2. When charging is complete, pull the cable again to extend the lifting mechanism's cord by approximately 3 to 10 cm, then stop pulling. This action disengages the lock. Allow the cable to retract under the lifting mechanism's tension—do not let go of the cable—until it is fully pulled back and the cord is completely wound into the lifting mechanism.